Abrasive Blast Machines and Sandblasters (285 Variants)

Abrasive blast machines and sandblasters clean and prepare surfaces by directing a stream of abrasive particles against a part or a surface.

Augers (83 Variants)

Augers are large diameter, drill-like devices that are used for drilling holes into the earth, stone and pavement as well as moving grain and water in certain applications.

Boom Lifts (117 Variants)

Boom lifts have an articulating arm or telescopic extension for lifting materials or personnel.

Cold Planers (17 Variants)

Cold planers are pavement recycling machines. These machines are asphalt milling machines that are used to remove pavement or asphalt concrete from roadways.

Concrete Mixers (113 Variants)

Concrete mixers are used to mix concrete during the processing of water, cement and aggregate media, or during the delivery and final pour preparation.

Construction and Demolition Attachments (298 Variants)

Construction and demolition attachments are specialized implements that are attached and used with heavy machinery to perform a job.

Deburring and Deflashing Machines (107 Variants)

Deburring and deflashing machines remove burrs or dross, smooth or deflash parting lines, round off sharp edges, and radius corners on machined parts, castings, forgings, molded components and welded assemblies.

Earth Moving and Landscaping Machines (722 Variants)

Earth moving and landscape machines are used to prepare construction sites, and to move dirt and gravel.

Electrical Power Generators (955 Variants)

Electrical power generators, also known as alternators, transform mechanical energy into electrical energy.  They can be used for backup or emergency power or as an alternator on board a vehicle. Generators can produce either AC or DC power and are typically powered by a fuel engine.

Forklift Extensions (37 Variants)

Forklift Extensions are devices used to extend the length of a forklifts existing forks. They are typically made of structural steel and slip over a forklifts existing forks. They are available in many sizes, finishes and profiles to meet specific applications.

Formwork (152 Variants)

Formwork are temporary or permanent concrete forms for building structures from concrete.

Grinders and Grinding Machines (981 Variants)

Grinders and grinding machines use an abrasive that is bonded to a wheel, belt or disc to remove material and improve surface finish.

Honing, Lapping, and Super-finishing Machines (127 Variants)

Honing, lapping and super-finishing equipment improve surface finish or geometry to tight tolerances.

Horizontal Directional Drilling Machines (HDD) (18 Variants)

Horizontal directional drilling (HDD) machines are steerable, trenchless drilling rigs for the installation of pipes, conduits, and cables underground.

Hydroblasters and Water Blasters (118 Variants)

Hydroblasters and water blasters direct high pressure (10,000+ psi) streams of water against a surface to clean or cut the material.

Industrial Cranes (962 Variants)

Industrial cranes raise, shift, and lower loads with a projected, swinging arm or a hoisting apparatus supported on an overhead track.

Lifts (1,619 Variants)

Lifts are used to raise and lower material, personnel, vehicles, and workpieces for loading and working positioning.

Light Towers (72 Variants)

Light Towers are portable lighting devices that are used to illuminate work areas. These products are commonly towable and provide their own power source.

Mowers (63 Variants)

Mowers are used to cut grass, plants, small trees, and other ground-based vegetation. These machines include dedicated mowing machines and attachment boom, flail and deck mowers.

Paving Machines (128 Variants)

Paving machines are used to pave roadways, walkways, or parking areas.

Pipe Fusion Machines (19 Variants)

Pipe fusion machines are used to fuse plastic pipe and fittings. These machines are used to prepare and join thermoplastic polymer materials such as polypropylene, polyethylene, PVDF and ECTFE pipe.

Pipelayers and Sidebooms (12 Variants)

Pipelayers and sidebooms are heavy material handling machines used for the lifting and installation of pipes during pipeline assembly.

Polishing and Buffing Machines (321 Variants)

Polishers and buffing machines are used to impart a fine (low Ra) surface finish on the exterior of a part. To improve surface finish, they use use abrasive grain slurries or compounds on buffs, bobs, cloth naps, laps, very fine grit nonwovens, and coated abrasives.

Pressure Washers (336 Variants)

Pressure washers direct a high-pressure stream or jet of water against a surface to clean, descale, degrease or prepare a surface.

Sanders and Sanding Machines (297 Variants)

Sanders and sanding machines are used to finish wood, plastic or composites through the application of abrasive belts, discs or sheets.

Scaffolding (180 Variants)

Scaffolding is a temporarily-constructed surface that supports elevated equipment, or that allows workers to gain access to buildings or equipment.

Soil and Asphalt Compactors (46 Variants)

Soil and asphalt compactors compress soil, asphalt, crushed aggregates, or landfill trash to increase the density of a collective substrate. They are common in construction, agricultural, waste and recycling, and municipal applications.

Spray Painting Equipment (Paint Sprayers) (248 Variants)

Paint spraying equipment and paint sprayers are used to atomize and propel a concentrated mist of a finish coating onto a surface. This includes the equipment used to directly apply the spray coating, as well as a variety of supporting equipment to optimize the painting process.

Sprayers and Spray Coating Equipment (387 Variants)

Sprayers and spray coating equipment refers to any component used in a variety of industrial spraying processes, including application tools, handling equipment, and supplemental machines. They are used in the process of atomizing coatings, paints, lubricants, solvents, deicing liquids, chemicals, and powders so they can be spray-applied to a surface.

Trench Shoring Equipment (37 Variants)

Trench shoring equipment includes trench shields and other shoring devices that are used to prevent a dug trench from caving-in on workers or equipment.

Trenchers (16 Variants)

Trenchers are machines used to cut a trench in the Earth's surface to lay pipelines, drainage and sewer systems, or other utilities. Trenchers are made for both surface and sea floor operations.

Underground Locating Equipment (46 Variants)

Underground locating equipment locates buried utility lines and infrastructure. This includes marker systems, fault detectors, ground penetrating radar, metal detectors, RF equipment, acoustic detectors, and beacon (sonde) devices.

Welding, Brazing, and Soldering Equipment (1,292 Variants)

Welders and welding machines include all manner of devices used for welding, brazing and soldering.